Products The 'Original' Range
 

Osmor Products Ltd
Unit 12,
Norman - D - Gate,
Bedford Road,
Northampton, NN1 5NT
Tel: 0800 73 11 936

Click HERE to contact us

 

Our 'Original' range of Cable Covers provide solutions for a number of different applications. The illustrations and details below provide an introduction to the range, please contact us for more details.
 
Micro
Available in black or grey
The micro profile has a slit base for easy cable insertion and an unribbed base for adhesion to double sided tape. For use with small cables.

Hole size: 7.5mm Overall: 62mm x 15mm x 9metres

Phone
Available in black or grey
The perfect solution for covering up to four phone leads.

Hole size: 16mm x 8mm Overall: 67mm x 12mm x 9 Metres

Multi
Available in black or grey
The multi is ideal for applications where a number of cables need to be made safe.

Hole size: 30mm x 10mm
Overall:
80mm x 18mm x 9 Metres

Crystal
The Crystal profile is produced from clear material which not only allows easy identification of cables but can 'assume' the colour of the floor surface. Can accept small rope lights for use in a dark area.

Hole size: 30mm x 10mm
Overall:
81mm x 18mm x 9 Metres

Speedi
   
Available in black or grey
The split base of the Speedi profile enables rapid covering of trailing cables, especially those with plugs or fittings already attached. When laid on the floor the slit of the base closes.

Hole size: 11mm Overall: 75mm x 16mm x 9 Metres

Double  
Available in black or grey
Some users prefer to separate cables such as computer and phone leads. The Double is the answer.

Hole size: 11mm each Overall: 81mm x 15mm x 9 Metres

Large  
Available in black or grey
The large profile will accommodate larger diameter cables such as extension leads or larger data cables.

Hole size: 14mm each Overall: 90mm x 18mm x 9 Metres
* Department of Transport Approved

Power  
Available in black or only
The Power profile is designed to accommodate power and armoured cables up to 1'' diameter.

Hole size: 26mm Overall: 145mm x 34mm x 5 Metres

Combi  
Available in black or grey
The Combi profile has two oblong channels offering increased capacity enabling the separation of groups of cables.

Hole size: 16mm x 10mm each
Overall:
93mm x 19mm x 9 Metres

Comnet  
Available in black or grey
The Comnet profile is ideal for networking applications where capacity requirement for power and data leads is unequal.

Hole size: 1 of 32mm x 12mm and one of 16mm x 12mm
Overall:
110mm x 20mm x 9 Metres

All dimensions nominal.


| Home | Profile | Products - Introduction | Cable Cover - Select & Install | Safety & Quality | Contact |
PRODUCT RANGE:
|
The 'ORIGINAL' Range of Cable Covers | The 'RIGID' Range of Cable Covers |
|
The 'HAZARD' Range of Cable Covers | Electrical Switchboard Matting |

 

A pageBspoke solution from pinkdylan